FUJIFILM X-T4 Mirrorless Camera (Black)

The FUJIFILM X-T4 Mirrorless Camera (Black) brings significant upgrades to Fujifilm’s acclaimed X-T line, adding in-body image stabilization, faster shooting, and a larger battery while retaining the series’ classic, dial-driven control philosophy. It’s well suited to photographers who shoot both stills and video and want fast performance in a weather-sealed, SLR-styled body.

At the core of the X-T4 is a 26.1MP APS-C X-Trans CMOS 4 back-illuminated sensor (23.5 x 15.6mm), paired with Fujifilm’s X-Processor 4, offering a native ISO range of 160-12800 (expandable to 80-51200). The non-Bayer X-Trans color filter array eliminates the need for an optical low-pass filter, helping reduce moiré while preserving fine detail. In-body 5-axis sensor-shift image stabilization is rated for up to 6.5 stops of correction (CIPA standard), the first time this feature has appeared in the X-T series.

Autofocus uses an Intelligent Hybrid system with 2.16 million phase-detection pixels across 425 selectable points, covering nearly 100% of the frame, along with Face/Eye Detection AF. Continuous shooting reaches up to 15fps with the mechanical shutter (a new, more durable shutter rated for 300,000 cycles) or 20fps with the electronic shutter, with the electronic shutter extending to 1/32000 second. Mechanical shutter speeds range from 30 seconds to 1/8000 second, with bulb exposures up to 60 minutes.

Video capability is a defining strength, with internal DCI/UHD 4K recording at up to 60p (full-width oversampled at 30p, cropped at 60p), along with Full HD recording at up to 240fps for 4-10x slow motion, 10-bit 4:2:2 color via HDMI (4:2:0 internal), and 12 Film Simulation modes, including Eterna Bleach Bypass. Handling centers on a 3.69-million-dot OLED electronic viewfinder (0.75x magnification, 100% coverage, up to 100fps refresh rate) along with a 3.0-inch, 1.62-million-dot fully articulating touchscreen LCD, useful for vlogging and flexible framing.

Build quality includes a rugged, weather-sealed magnesium alloy body with dual UHS-II SD card slots, a 1/250 second flash sync speed via the external hot shoe (no built-in flash), and USB-C connectivity supporting USB PD charging. The camera is powered by a new NP-W235 battery, rated for approximately 500 shots per charge, and connects via Wi-Fi (802.11b/g/n) and Bluetooth 4.2. It measures approximately 134.6 x 92.8 x 63.8mm and weighs approximately 607g (including battery and card). The X-T4 uses Fujifilm’s X-mount lens system, giving it access to Fujifilm’s full range of native XF and XC lenses.

Key Features
– 26.1MP APS-C X-Trans CMOS 4 back-illuminated sensor with X-Processor 4
– ISO 160-12800 (expandable to 80-51200)
– 5-axis in-body image stabilization, up to 6.5 stops (CIPA)
– Intelligent Hybrid AF, 2.16M phase-detection pixels, 425 selectable points
– Face/Eye Detection AF
– Up to 15fps mechanical shutter (300,000-cycle rated) / 20fps electronic shutter
– Mechanical shutter 30 sec-1/8000 sec (60-min bulb); electronic shutter to 1/32000 sec
– Internal DCI/UHD 4K video up to 60p; Full HD up to 240fps (4-10x slow motion)
– 10-bit 4:2:2 HDMI output; 12 Film Simulation modes (including Eterna Bleach Bypass)
– 3.69M-dot OLED EVF (0.75x magnification, 100% coverage, up to 100fps)
– 3.0″ 1.62M-dot fully articulating touchscreen LCD
– Weather-sealed magnesium alloy body
– Dual UHS-II SD card slots
– 1/250 sec flash sync; no built-in flash
– USB-C with USB PD charging support
– Wi-Fi (802.11b/g/n) and Bluetooth 4.2
– NP-W235 battery (~500 shots per charge)
– Approximate weight: 607g (with battery and card)
– Fujifilm X-mount lens compatibility