Nikon D610 DSLR Camera (Body Only)

The Nikon D610 DSLR Camera (Body Only) is a full-frame DSLR aimed at enthusiasts upgrading from mid-range models or professionals looking for an affordable backup for a higher-end body. It shares the same core components as its predecessor, the D600, but adds a refined, quieter shutter mechanism rated for faster, more reliable continuous shooting.

At the core of the D610 is a 24.3MP FX-format CMOS sensor (35.9 x 24mm) paired with Nikon’s EXPEED 3 image processor, offering a native ISO range of 100-6,400, expandable to 50-25,600. Autofocus uses Nikon’s Multi-CAM 4800 39-point AF sensor (9 cross-type), with AF sensitivity down to -2 EV and support for f/8 autofocus with teleconverters (subject to sensor limitations). Metering uses a 2,016-pixel RGB sensor supporting 3D Color Matrix Metering II with face recognition, along with Multi-Segment, Center-Weighted, Spot, and Partial metering patterns. Continuous shooting reaches up to 6fps, a notable improvement over the D600’s 5.5fps thanks to the new shutter mechanism.

The mechanical shutter offers speeds from 30 seconds to 1/4000 second, rated for 150,000 cycles, with flash sync at 1/200 second. A built-in pop-up flash offers a guide number of 12m at ISO 100 (the same unit used in the D800) and can function as a commander for off-camera CLS-compatible flash units. Video capability includes Full HD 1080p recording at up to 30fps with uncompressed HDMI output, along with a dedicated movie-record button and a live view switch for toggling between still and movie live view modes.

Handling centers on a bright optical pentaprism viewfinder offering 100% frame coverage and 0.7x magnification, matching the viewing experience of Nikon’s considerably more expensive D800 and D4, along with a 3.2-inch, 921,000-dot fixed TFT LCD monitor. The camera includes two IR receiver windows (front and rear) for compatibility with Nikon’s inexpensive ML-L3 wireless remote, along with full support for AF, AI-P, AI, and AI-S lenses, making it notably compatible with legacy Nikon and third-party optics.

Build quality includes a magnesium alloy top and rear cover with weather sealing, along with dual SD card slots supporting simultaneous recording, overflow storage, or separate JPEG/RAW and still/video storage. The camera measures approximately 141 x 113 x 82mm and weighs approximately 850g with battery and cards, and is compatible with Nikon’s optional WU-1b wireless mobile adapter for wireless image transfer. The D610 uses Nikon’s F-mount lens system, giving it access to Nikon’s extensive range of FX and DX-format lenses.

Key Features
– 24.3MP FX-format CMOS sensor with EXPEED 3 image processor
– ISO 100-6,400 (expandable to 50-25,600)
– Multi-CAM 4800 39-point autofocus system (9 cross-type), AF sensitivity to -2 EV
– 2,016-pixel RGB metering sensor (3D Color Matrix Metering II with face recognition)
– Up to 6fps continuous shooting
– Mechanical shutter, 30 sec to 1/4000 sec; rated for 150,000 cycles
– Built-in flash (GN 12m at ISO 100) with commander mode
– Full HD 1080p video up to 30fps with uncompressed HDMI output
– Dedicated movie-record button; still/movie live view switch
– Optical pentaprism viewfinder (100% coverage, 0.7x magnification)
– 3.2″ 921,000-dot fixed TFT LCD monitor
– Dual IR receiver windows (ML-L3 remote compatible)
– Compatible with AF, AI-P, AI, and AI-S Nikon lenses
– Weather-sealed magnesium alloy top/rear covers
– Dual SD/SDHC/SDXC card slots
– Compatible with optional WU-1b wireless mobile adapter
– Approximate weight: 850g (with battery and cards)
– Nikon F-mount lens compatibility (FX and DX lenses)