Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon

The Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon is Godox’s first TTL flash trigger, giving photographers remote control over compatible Godox flashes and monolights from a compact unit mounted in the camera’s hot shoe. It’s built for photographers who use off-camera lighting and need reliable, fully automatic flash control tied directly into Canon’s native metering system.

The trigger operates on Godox’s built-in 2.4GHz X wireless system, offering multi-channel triggering with stable signal transmission and sensitive response, and full compatibility with Canon EOS cameras and flashes supporting E-TTL/E-TTL II for automatic exposure and metering. It fully supports E-TTL II autoflash, flash exposure compensation, flash exposure lock, and modeling flash, along with high-speed sync up to 1/8000 second for balancing flash output against bright ambient light or shooting wide apertures in daylight.

Multi-channel control is a key feature, with up to 32 channels and 5 groups available, along with a GR group flash mode where A-E groups can each be set to their own flash mode independently, or a ratio flash mode offering relative power control across three groups (A:B:C). Operating distance reaches up to 100 meters (328 ft.), and additional functions include sync delay settings, wireless shutter release, zoom setting (adjusting the flash’s focal length through the transmitter), and memory function, which stores settings a couple of seconds after the last operation and restores them on restart.

Handling centers on a wide, backlit LCD panel for clear visibility of current settings, with a hot shoe on top for mounting a flash directly to the transmitter, and a PC sync terminal for connecting studio strobes via cable. A Micro-USB port allows for firmware updates to help maintain compatibility with newer camera and flash systems over time. The trigger runs on 2 AA batteries and measures approximately 72 x 75 x 52mm, weighing approximately 99-100g.

Key Features
– Godox’s first TTL wireless flash trigger, built for Canon E-TTL/E-TTL II cameras
– Built-in 2.4GHz X wireless radio system
– Full E-TTL II autoflash support
– High-speed sync up to 1/8000 sec
– Flash exposure compensation and flash exposure lock
– Modeling flash support
– 32 channels, 5 groups; GR group mode (independent A-E group flash modes) and ratio mode (A:B:C)
– Operating range up to 100m (328 ft.)
– Sync delay setting, wireless shutter release, and zoom setting
– Memory function (auto-saves settings)
– Backlit LCD panel
– Hot shoe mount and PC sync terminal
– Micro-USB port for firmware updates
– Runs on 2 AA batteries
– Compact design (approximately 72 x 75 x 52mm, ~99-100g)