Godox AD200Pro TTL Pocket Flash Kit

The Godox AD200Pro TTL Pocket Flash Kit is a portable, battery-powered flash system built around a unique interchangeable-head design, giving photographers the power of a studio strobe in a genuinely pocket-sized unit well suited to both studio and on-location lighting. It’s an enhanced second generation of Godox’s original AD200 “Pocket Flash,” adding a faster recycle time and refined controls.

At 200Ws of power, the AD200Pro offers two interchangeable flash heads: a standard Speedlight (Fresnel) head with a built-in LED modeling light, and a bare bulb head with a removable, user-replaceable flash tube that produces 360 degrees of soft, nearly shadowless light, giving photographers two distinctly different qualities of light from a single unit. Guide number reaches 170.6 ft. (52m) at ISO 100 with the Speedlight head at 35mm, or 197 ft. (60m) with the bare bulb head and included AD-S2 reflector at 28mm. Power is adjustable across 9 steps from full power (1/1) down to 1/256, and color temperature remains a steady 5600K (±200K) across the entire power range.

The flash offers Manual, TTL, and Multi (stroboscopic) flash modes, with TTL metering handled through the flash head’s built-in X1 receiver when paired with an optional X1 or X2-series wireless transmitter, supporting Canon E-TTL/E-TTL II, Nikon i-TTL, Sony ADI/P-TTL, FUJIFILM TTL, and Four Thirds TTL systems. High-Speed Sync is available up to 1/8000 second, along with first- and second-curtain sync, and flash exposure compensation adjustable in 1/3-stop increments across a ±3 stop range. Stroboscopic (Multi) mode fires up to 90 times at up to 99Hz, and flash duration ranges from 1/220 to as fast as 1/15,380 second (Speedlight head) or 1/13,510 second (bare bulb head).

A built-in 2.4GHz wireless X System functions as a slave receiver, offering 32 channels and 5 groups (A-E) with a wireless working range of up to 328 ft. (100m). Power comes from an included 14.4V, 2900mAh lithium-ion battery, rated for up to 500 full-power flashes with a recycle time as fast as 0.01 to 1.8-2.1 seconds. The flash automatically hibernates after 30 minutes of non-use, with an LED and audible beep confirming flash readiness.

Build quality weighs approximately 570-590g (without flash head and battery) and measures approximately 17 x 7.5 x 5cm, with USB connectivity for firmware updates. The kit includes the AD200Pro flash body, a Speedlite (H200) head, a bare-bulb head with flash tube, a rechargeable lithium-ion battery, a charger and cable, an AD-E2 flash bracket, and a carrying case.

Key Features
– 200Ws portable battery-powered flash with interchangeable heads
– Speedlight (Fresnel) head with built-in LED modeling light
– Bare bulb head with removable, user-replaceable flash tube (360° light spread)
– Guide number up to 197 ft. (60m) at ISO 100 (bare bulb head, with AD-S2 reflector)
– 9-step power adjustment (1/256 to 1/1)
– Manual, TTL (via optional transmitter), and Multi (stroboscopic, up to 90x/99Hz) modes
– High-Speed Sync up to 1/8000 sec; first/second curtain sync
– Flash exposure compensation (±3 stops, 1/3-stop increments)
– Flash duration as fast as 1/15,380 sec (Speedlight) / 1/13,510 sec (bare bulb)
– Built-in 2.4GHz wireless X System (slave mode; 32 channels, 5 groups; up to 328 ft./100m range)
– Rechargeable 14.4V, 2900mAh lithium-ion battery (up to 500 full-power flashes)
– Recycle time as fast as 0.01-1.8/2.1 seconds
– Auto-hibernate after 30 minutes of non-use
– USB port for firmware updates
– Includes Speedlite head, bare-bulb head with flash tube, battery, charger, AD-E2 bracket, and carrying case
– Compatible with Canon, Nikon, Sony, Olympus, and FUJIFILM TTL (optional transmitter required)